Equipment Inventory
Manufacturer: Rockwell - Delta
Model#: 46-450 (North & Middle)
Stock#: n/a
Serial#: 1701683 (North, nearest in picture), 1701682 (Middle)
Acquired: ??
Manufacturer: Teknatool International Ltd.
Model#: G3
Stock#: n/a
Serial#: n/a
Acquired: February 2016
Manufacturer: Teknatool International Ltd.
Model#: Nova Galaxi DVR 1644 Wood Lathes
Stock#: n/a
Serial#: GL 5664405 (Jan. 2022)
Manufacturer: Teknatool International Ltd.
Model#: SuperNOVA2 Chuck (purchased as NOVA 24245 Kit)
Stock#: n/a
Serial#: 0093927
Acquired: April 2017
For Students / Users
- Wood LatheSafety Video
- Wood Lathe Safety Guidelines
- Nova Galaxi DVR 1644 Instruction Manual
- SuperNOVA2 Chuck Instruction Manual
- Teknatool Chuck Accessory Jaw Manual
- NOVA G3 4-Jaw Chuck Instruction Manual
- Easy Turning Tools -- Carbide Insert Instruction Manual
- How to install / remove difficult face plates and hand brakes on the Galaxy lathes
Videos
Maintenance History
Nova Galaxi 1644 Lathe
Nova Galaxi 1644 Lathe
Nova Galaxi 1644 Late GL 5662444 -- The incoming neutral wire connector became disconnected from the fuse/switch. The red panel had to be removed (and the hand brake that is reverse threaded) had to be removed so the plate could come off. To remove the hand brake wheel, the 4-jaw chuck was installed with a 1/2" thick piece of wood clamped in the jaws to keep the lathe shaft from rotating.